毕业论文设计《基于CPLD的电梯控制器的设计》.doc

PAGE 南京信息职业技术学院 毕业设计论文 作者 学号 系部 电子信息学院 专业 无线电技术 题目 基于CPLD的电梯控制器的设计 指导教师 评阅教师 完成时间： 2010 年 3 月 30日 毕业设计(论文)中文摘要 (题目)：基于CPLD的电梯控制器的设计 摘要：济的高速发展，微电子技术、计算机技术和自动控制技术也得到了迅速发展，交流变频调速技术已经进入一个崭新的时代，其应用越来越广。电梯是现代高层建筑的垂直交通工具，其设计要求稳定性、安全性及高。随着人们生活水平的不断提高,对电梯的要求的也相应提高，电梯得到了快速发展，我国国产电梯多为继电器，本次设计的软件控制部分由Verilog来实现，研究、分析电梯的逻辑关系，进而实现控制。通过合理的选择和设计，提高了电梯的控制水平，并改善了电梯运行的舒适感，使电梯达到了较为理想的控制效果。 关键词：电梯；硬件描述语言；编译；仿真 毕业设计(论文)外文摘要 Title : CPLD-based elevator controller design? Abstract: With the high-speed development of economy, micro electric technique technology of the computer and automatic control technology have been developed rapidly, exchange frequency conversion and adjust speed technology and already enter a brand-new era, its application is wider and wider. The lift is the vertical means of transportation of the modern skyscraper, its designing requirement stability , security and high. Living standard constant to raise with people, requisition for lift too corresponding to improve, the lift has got the fast development, the domestic lift of our country is mostly relay control method, the software designed this time is controlled some to realize by Verilog, the logic relation of studying , analysing the lift , and then realize control. Through rational choice and design , have improved the control level of the lift , has improved the comfort that the lift operates, make the lift reach the comparatively ideal control result. Keywords: lift Hardware Description Language Compiler Simulator 目 录 TOC \o 1-3 \h \z \u HYPERLINK \l _Toc260857365 1 绪论 PAGEREF _Toc260857365 \h 5 HYPERLINK \l _Toc260857366 1.1概述 PAGEREF _Toc260857366 \h 5 HYPERLINK \l _Toc260857367 2 硬件控制 PAGEREF _Toc260857367 \h 6 HYPERLINK \l _Toc260857368 2.1 变频器的工作原理 PAGEREF _Toc260857368 \h 7 HYPERLINK \l _Toc260857369 2.2 变频器的基本构成 PAGEREF _Toc26085