油头试验台说明书.pdf

HDP1100-D2 型 船用柴油机喷油器试验装置 使 用 说 明 书 FuelValveTestPump Unit InstructionsManual 制造商: 常 州 艾 乐 森 动 力 技 术 有 限 公 司 Maker:ChangzhouAllison PowerTechnology Co. Ltd. 64 地 址：江苏常州西林街道朱夏墅村委 号 Tel:(+86) 0519 Fax： (+86) 0519 Description Operating Instruction For Test Pump Unit For Marine Diesel Engine Valve I. Function The pump unit, mainly used to measure its spray condition, is an essential test tool for high-power diesel engines. It has the advantages of big power, small size, compact structure and easy operation etc. II. Main technical date 1. Output pressure:Max.80MPa at 0.7MPa air input. 2. Air consumption: 12 Liters/cycle at 0.7MPa air input. 3. Max. flow of fuel oil:40ML/cycle at an air input of 0.4Mpa 4. Pumping speed:30cycle/Min at 0.4MPa air input (no outputpressure). 5. Tank capacity: 8L 6. Dimension:700x450x1120mm 7. Weight:77kg III. Control panel description (1).Full-stroke pump valve (2).Oil return valve (3).Pressure control valve (4).Oil leveler (5).Switch knob (6).Input air pressure gauge (7).Digital instrument:WORKING PRESSURE (8).Digital instrument:VENTING+OPENING PRESSURE (9).Connector for fuel outlet (10).Air quick connector (11).Fuel oil filler IV. Preparation before connecting the pump unit 1.Fill the tank with hydraulic oil(viscosity 7—10cSt at 50℃)through filler. Turning the oil return (2) valve counter-clockwise before ventilation for openingandreturningoil.Thepressure controlvalve (3) isclosedby turning counter-clockwise.Only slowly and clockwise to turn and open the Pressure control valve until required pressure. 2. Compressed air is led through a flexible hose to the air inle