关于穿透厚砂层锤击沉桩复打施工工艺的探讨.docVIP

关于穿透厚砂层锤击沉桩复打施工工艺的探讨 　　 　　摘要：港口工程预制桩普遍采用锤击沉桩进行，当设计桩端土层为硬塑状的粘性土或粉细砂时，采用贯入度和标高“双控”标准。本文主要介绍在厚砂层中沉桩在达到“双控”标准后，高出设计标高两米以上，桩基承载力不理想，采取复打桩的施工工艺，并进行详细的分析阐述。 　　关键词：厚砂层; 锤击; 复打; 探讨 　　Abstract: port engineering precast pile hammer piles are widely used to sink, when the pile endpoint soil for design of hard plastic, cohesive soil or silty sand, the penetration and elevation of double control standards. This paper mainly introduces the sand layer in the thick pile in to double control standard, design elevation higher than two meters above, pile foundation bearing capacity is not ideal, take after p