光电材料试验室科技3B2123620.PDF

光電材料實驗室 (科技 3B212, 3620) Optoelectronic Materials Lab.(3B212,3620) 負責老師：林彥勝 實驗室分機：3987, 3834 Prof. Yen-Sheng Lin Lab. Phone: 3987, 3834 一、實驗室特色(The features of laboratory) 建立基礎研究之先進光電材料試片準備、製程及分析量測實驗室。除提供本系作為基本之光電材料教學實 驗室外，亦支援本校相關系所教師及研究生自行研製有關奈米薄膜、光電及半導體等元件。 To establish laboratory as the basic research for the preparation of advance optoelectronic materials specimens 、growth procedure and analysis of measurement. To provide not only teaching of basic optoelectronic materials lab. for Department of Electronics Engineering, but also support teachers and postgraduates who come from the related department to research and produce about the analysis of basic materials in nano-thin films, optoelectronics and semiconductor components. 二、主要適用對象(The main suitable persons) 研究所(graduate school) 、大四(Senior) 、大三(Junior) 三、實驗設備(Experiment equipments)  直流電源供應器(DC power supply)  交流電源供應器(AC power supply)  光譜量測儀(Spectrometer)  超音波震盪器(Sonicator) 1     室溫加熱板(Heater)  可變速鑽石切割機  高 解 析 光 學 顯 微 鏡 分 析 設 備 (High-resolution optical microscopy analysis equipment) 2    *數位式電腦輸出、顯微影像可測量尺寸數據、半導體目檢外觀、電鍍金屬觀察、微細顆 粒觀察(Digital type computers output 、measurable data by micro image 、surface observation of semiconductor 、coating observation 、micro particles observation) *廣角 WF10X/左眼獨立視差調整(pantoscopic 、WF10X/ Left eye independent parallax adjustment) 圓柱 / 齒條式調焦系統(Column/ Rack type focusing system) 255X200mm 標準無光平台(255X200mmStandard non-light platform)  光電材料分析試片製程設備(Optoelectronic Materials analysis equipment) Disk Size: 2 x 10 or 12  Working Wheel Speed  Fixed Speed 150/300  or variable speed 50 ‐ 600 rpm