现代设备润滑管理培训讲座1p31dmag.pptVIP

* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * ?Most bearing applications use greases of NLGI grades 1, 2 or 3. The majority of bearing applications use NLGI grade 2. In some cases, provision is made in the application for separate greasing of the bearings and seals, which may require different grades, if not entirely different types, of greases. Grades 0, 00, and 000 are used in splash applications where the components are wetted during running. The low-consistency grease remains present on the splashed surfaces longer than oil would in the same application. Grease gra