一种间歇式轧钢加热炉温度场的研究-JournalofNortheastern.PDF

第29 卷第5期 东 北 大 学 学 报 ( 自 然 科 学 版 ) Vol129, No. 5 20 08 年 5 月 Journal of Northeastern U niversit ( Natural Science) M a 2 0 0 8 李宝宽, 齐凤升, 王 芳, 高泰荫 ( , 110004) : , , CFD( ) # , Fluent , # # # : ; ; ; CFD; : T F 061. 1 : A : 1005-3026( 2008) 05-070 1-04 Study on Temperature Field in an Intermittent Reheating Furnace LI Bao-kuan, QI Feng-sheng, WANG Fang, GA O Tai-yin ( School of Materials Metallurg , Nort heastern Universit , Shen ang 110004, China. Correspondent: LI Bao- kuan, E-mail: lbk6382 @ 163. com) Abstract: To make sure that the billet/ bloom temperature meet the rolling requirement so as to provide qualit steel sections, the temperature distribution in reheating furnace is of crucial importance. With the intermittent reheating furnace using natural gas as fuel exemplified, the transient 3D distribution of temperature fields in the furnace and heated billet/ bloom are anal zed introducing CFD( computational fluid d namics) , i. e. , the softw are Fluent is used to simulate the temperature distribution in furnace under different operating conditions, thus providing theoreticall a reference for improving the efficienc of reheating furnace. In the simulation the heat loss due to furnace door opening for billet/ bloom discharging and charging is taken into account . The simulation results are available to optimize the operating parameters so as to improve the qualit of finished paroducts. Key words: intermittent reheating furnace; temperature field; natural gas; CFD( computational fluid d namics) ; numerical simulation