OTIS奥的斯XIOTIS西子奥的斯GDCB_Event Log故障代码.pdf

Document: 55661 Sheet 51 of 121 6.2.8 Event Menu Detailed Descriptions The following list includes all events detected. Column 1: The name of the event, including the event code Column 2: The response to the event, followed by the number of occurrences in series that leads to a drive blockage (see Section 6.2.3). Column 3: A description of the event including possible causes and potential solutions. 6.2.9 Information Events SVT Display Description 000 Power On I Power was applied to the drive. 001 New Run I A new run was initiated. 002 SPARE I Not used. 003 Stack Warn W The stack usage has exceeded an acceptable limit. 004 Power Down I The power fail signal in the hardware was activated. 005 Extern FLASH W The GDCB FLASH memory has failed. 006 Extern RAM W The GDCB RAM memory has failed. 007 OMU Present I Indicates that a valid OMU is plugged into the drive OMU port at power-up. 008 OMU Prohibit I Indicates that an OMU software upgrade is prohibited because the previous run was TCI. The status of the permissive can be viewed in the SVT parameter OMU Prohibited. Solution If this fault occurs, it can be cleared by performing an ERO run (the ERO run confirms that the mechanic is in the hallway). 009 Manual Mode I Indicates that the drive is in Manual Mode. 010 B_MODE I Applic