电脑摇头光束灯-双棱镜.PDFVIP

需要帮助？ 在线帮助： 11. Maintenance and Cleaning 电脑摇头光束灯-双棱镜 The following points have to be considered during the inspection: 1) All screws for installing the devices or parts of the device have to be tightly connected and must not be (DF-BEAM230) corroded. 2) There must not be any deformations on the housing, color lenses, fixations and installation spots (ceiling, suspension, trussing). 3 ）Mechanically moved parts must not show any traces of wearing and must not rotate with unbalances. 4 ）The electric power supply cables must not show any damage, material fatigue or sediments. Further instructions depending on the installation spot and usage have to be adhered by a skilled installer and any safety problems have to be removed. In order to make the lights in good condition and extend the life time, we suggest a regular cleaning to the lights. 1) Clean the inside and outside lens each week to avoid the weakneness of the lights due to accumulation of dust. 2) Clean the fan each week. 3) A detailed electric check by approved electrical engineer each three month, make sure that the circuit contacts are in good condition, prevent the poor contact of circuit from overheating. We recommend a frequent cleaning of the device. Please use a moist, lint- free cloth. Never use alcohol or solvents. There are no serviceable parts inside the device. Please refer to the instructions under “Installation instructions”. 用户手册 Should you need any spare parts, please order genuine parts from your local dealer. 修订日期：2015 年10 月 广州多芬灯光设备有限公司