《基于DSP和以太网的数据采集系统软件设计》-毕业论文.docVIP

PAGE 西南科技大学本科生毕业论文 PAGE V PAGE 西南科技大学 毕业设计（论文） 题目名称：基于DSP和以太网的数据采集系统软件设计 基于DSP和以太网的数据采集系统软件设计 摘要：充分利用DSP的优良性能，将计算机网络技术引入以DSP为核心的嵌入式系统，已成为一个重要的研究课题。 本文设计了一种基于TI公司的DSP芯片TMS320VC5509A的以太网终端系统方案并给出了该方案的具体设计实现。本论文对TCP/IP协议进行了分析，论述了基于DSP芯片和网卡接口控制芯片的以太网设计，讨论了在VB开发环境下PC机与终端系统的数据交互问题并编写了实际的PC机控制软件。同时，讨论了在DSP开发环境下的主程序设计和C语言开发程序需要编写的辅助文件，包括头文件、中断向量文件和命令文件。最后，对设计软件进行了测试。验证了本课题研究的基于DSP和以太网的数据采集系统可以实现数据的以太网传输。 关键词：DSP；以太网；VB；TCP/IP ；AD转换 The Software Design of Data Sampling System Based on DSP and Ethernet Abstract：Based on the excellent performance of DSP, this paper introduces the embedded system cored with DSP into computer network. This application system becomes a significant research problem. In this paper, we design an Ethernet terminal system based on the TI Company’s DSP of TMS320VC5509 and present the schemes software-realization in detail. TCP/IP is studied and analyzed firstly and chosen while the real condition is considered. And then the Ethernet is designed with DSP chip and network interface controller (NIC) chip. We discuss the PCs data exchange with the Ethernet terminal in VB development environment and compile PC software to realization controllable program. Then, we discuss the main program and the initialized program is designed in DSP development environment. At the same time, the auxiliary files are discussed which is demanded when the protocol program is designed with C language in DSP development environment, including header file and interrupt vectors file and command file. In the end, the designed program is tested. The result indicates data sampling system that was researched in my subject could realize the transmission of the data through Ethernet based on DSP and Ethernet. Key words: DSP, Ethernet, VB, TCP/IP, AD Transition 目 录 TOC \o 1-3 \h \z \u HYPERLINK \l _Toc169878705 第1章 绪论 PAGEREF _Toc169878705 \h 1 HYPERLINK \l _Toc169878706 1.1 概述 PAGEREF _Toc169878706 \h 1 HYPERLINK \l _Toc169878707 1.1.1 本课题研究的背景及依据 PAGEREF _Toc16