Lesson-Two-Introduction-to-Mechanics-of-Materials书籍.docVIP

Lesson Two Introduction to Mechanics of Materials In all engineering construction the component parts of a structure must be assigned definite physical sizes. Such parts must be properly proportioned to resist the actual or probable forces that may be imposed upon them. 在所有的工程构造中，结构的构件必须具有确定的实际尺寸。这些构件必须比例适当，能够承受实际施加或可能施加于其上的力。Thus, the walls of a pressure vessel must be of adequate strength to withstand the internal pressure; the floors of a building must be sufficiently strong for their intended purpose; the shaft of a machine must be of adequate size to carry the required torque; a wing of