《杯子实体设计》-毕业论文.docVIP

PAGE 精品 精品 摘 要 塑料杯子是一种被广泛应用于各种人群中的生活用具。塑料杯子之所以得到如此广泛的应用，主要是由于塑料杯子便宜，携带轻巧且比金属杯子外观漂亮。 塑料杯子采用聚苯乙稀（PS）是一种无色透明、无毒无味，密度为1.045g/cm3的塑料品种且成品率高，但是又易出现裂纹，因此在设计过程中我将杯子的脱模斜度设计为5度。 由于杯子作为人们平日饮水的必需品，因此它在我们生活中有着重大的价值，且它本身无毒且挈带方便、价格低廉。俗话说“水是生命之源”，我们如果没有杯子那会是怎样的场面，也许你回说难道只有杯子可以喝水吗，有碗不行啊？的确是，但是你见过拿着碗到处喝水的人了吗？ 塑料杯子采用聚苯乙稀（PS）是一种无色透明、无毒无味，密度为1.045g/cm3的塑料品种且成品率高，但是又易出现裂纹，因此在设计过程中我将杯子的脱模斜度设计为5度。 关键词：杯子、实体、设计 Abstract Cup is a widely used in a variety of family and complant.The reason why such a wide used,becase it don”t expencive and it not heath and vere biutifull. Compared with the linkage mechanism, cam mechanism to facilitate the realization of the given rules and track the movement; and compact structure is simple; but the cam and follower high-ah, deputy contact and easy to wear. Cam cam can be a continuous rotation or move converted to Follower continuous or to move or swing. Compared with the linkage mechanism, cam mechanism to facilitate the realization of the given rules and track the movement; and compact structure is simple; but the cam and follower high-ah, deputy contact and easy to wear. In this paper, the design of cam need to understand the relevant terms and the need for the design of the cam and cam design parameters appear in the actual contours of the distortion curve and a sharp change, as well as the solution to the problem in the design should pay attention to the issue of the system Introduction and summary. Key words：Buteafull、exspenseve、take 目 录 TOC \o 1-3 \h \z \u HYPERLINK \l _Toc222819861 第一章塑料杯子的介绍 PAGEREF _Toc222819861 \h 1 HYPERLINK \l _Toc222819862 第一节 杯子的运用范围 PAGEREF _Toc222819862 \h 1 HYPERLINK \l _Toc222819863 第二节 杯子的价值 PAGEREF _Toc222819863 \h 1 HYPERLINK \l _Toc222819864 第三节 材料的介绍 PAGEREF _Toc222819864 \h 1 HYPERLINK \l _Toc222819865 第二章 工艺性考虑 PAGEREF _Toc222819865 \h 4 HYPERLINK \l _Toc222819866 第一节 选材的考虑 PAGEREF _Toc222819866 \h 4 HYPERLINK \l _Toc222819867 第二节 外型确定 PAGEREF _Toc222819867 \h 4 HYPERLINK \l _Toc222819868 第三章