《烧结配料除尘器控制系统设计》-毕业论文.docVIP

烧结配料除尘器控制系统设计 摘要 由于在烧结配料的过程中会产生大量灰尘及粉尘等有害物质.必须通过除尘系统将它们净化，从而减少它们对环境的污染。随着科学技术的飞速发展，环境卫生法的颁布，对除尘工艺的要求也进一步提高，袋式除尘工艺是我国现有工业生产中必不可少的环节，占据着重要的地位。烧结配料除尘器控制系统，采用西门子S-7 400系列PLC作为控制系统硬件，使用西门子STEP 7软件对S-7 400 PLC进行组态并进行结构化编程完成对焦炉除尘设备的逻辑控制。运用SIMATIC WINCC 人机接口软件进行上位机人机界面的制作，使操作人员能及时的对所操作的设备进行监控，并清楚了解设备的运行状态。本设计根据现场的生产工艺对电器控制系统提出的要求，结合当前普遍采用的数字化控制系统，制定系统的解决方案。阐述了烧结配料除尘控制系统的工艺流程以及可编程控制器在工业自动化上的应用，介绍STEP 7 组态软件和SIMATIC WINCC人机接口软件在硬件组态和逻辑编程上的应用。对PLC控制系统设计的基本内容以及一般步骤，对硬件的选用和对软件的编辑都做了相应的阐述。 关键词：袋式除尘器；step-400；PLC；WinCC The Design of Dust Control System For sintering burden Based on The S7-400 Abstract As a result of the process of sintering burdening out of the process will produce a large number of dust and harmful gases, it is necessary to purify their dust removal system, thereby reducing their impact on the environment. With the rapid development of science and technology, environmental health law, Process for the removal of the requirement to further improve，Dust bag process is the production of Chinas existing industrial areas essential links, occupies an important position. Dust control system for sintering and burdening , the use of Siemens S-7 400 Series as a PLC control system hardware, the use of the Siemens STEP 7 software on the S-7 400 PLC to carry out the structural configuration and programming to complete the logic of coke dust control equipment.SIMATIC WINCC use man-machine interface software for PC production man-machine interface, so that the operator in time for the operation of the equipment monitoring, and a clear understanding of the operational status of equipment. The design of coke dust on the process control system of ground stations, as well as programmable controllers in industrial automation applications, introduced and the STEP 7 configuration software SIMATIC WINCC man-machine interface software in the hardware configuration and the application of logic programming results. PLC control system design of the basic content as well as the general