《水质监测系统软件设计》-毕业论文（设计）.doc

PAGE 基于GPRS的水质参数监测系统设计 ——单片机msp430的软件设计 设计总说明 水质参数监测系统是水资源管理与保护的重要基础，是监测水环境的重要手段。传统的水质监测采用实地采样，这种方法有一定的准确性，但是这种在固定的采样点及采样时间进行的监测，不能进行实时监测，无法满足水资源管理与保护的需要。针对这个问题，本设计给出了一个基于GPRS和MSP430单片机的水质参数实时监测系统，实现了由间断性人工监测向连续性自动监测的转变，从而实现了水质参数监测实时远程控制的连续性。根据硬件条件，对软件实现部分通过划分模块进行详细设计，主要包括数据采集模块、LCD显示模块和串口通信模块。本设计通过IAR EW430编程环境分别实现系统的主要功能模块。在完成硬件设计和软件调试的基础上，用Proteus仿真平台对LCD显示、串口通信进行仿真。仿真结果显示，该系统的设计方案可行。 关键词：GPRS； MSP430单片机；软件设计；仿真 Based on the Water Quality Parameters of GPRS Design of the Monitoring System ——Microcontroller msp430 Software Design Design Description Parameters of water quality monitoring system is an important base for water resource manager and protection，and also an important measure to protect water environment. The traditional water surveillance uses on the spot methods and so on sampling, laboratory analysis. This method has certain accuracy, but this kind carries on the fixed sampling point and the sampling time the monitor, cannot carry on the real-time monitor, is unable to satisfy the water resources management and the protection need. In view of this question, the design has given one kind based on GPRS and the MSP430 monolithic integrated circuits water quality real-time observation system. It has realized by the discontinual manual monitor to the continuous automatic monitor transformation, thus has realized the water surveillance real-time remote control continuity. According to the hardware condition, realizes the part to the software to carry on the detailed design through the division module, mainly includes the data acquisition module, the LCD display module and the serial port connection module. Programming environment realizes systems major function module separately through IAR the EW430. In completes the hardware design and in the software debugging foundation, with the Proteus simulation platform to the LCD demonstration, and the serial port correspondence carries on the simulation. The simulation result demonstrated that this systems des