BSEN1002562004A12009热轧结构钢制品第6部分经淬火和回火处理的具有高屈服强度的结构钢板材制品的交货技术条件可编辑.docVIP

BS EN 10025-6-2004 A1-2009 热轧结构钢制品 第6部分：经淬火和回火处理的具有高屈服强度的结构钢板材制品的交货技术条件（可编辑） BS EN 10025-6-2004+A1-2009 热轧结构钢制品 第6部分:经淬火和回火处理的具有高屈服强度的结构钢板材制品 的交货技术条件 BRITISH STANDARD BS EN 10025-62004 A12009 Hot rolled products of structural steels Part 6 Technical delivery conditions for flat products of high yield strength structural steels in the quenched and tempered condition ICS com com BS EN 10025-62004A12009 National foreword This British Standard is the UK implementation of EN 10025-62004A12009 Its supersedes BS EN 10025-62004 which is withdrawn The start and finish of the text introduced or altered by amendment is indicated in the text by tags Tags indicating changes to CEN text carry the number of the CEN amendment For example text altered by CEN amendment A1 is indicated by The UK participation in its preparation was entrusted to Technical Committee ISE12 Structural steels A list of organizations represented on this committee can be obtained on request to its secretary This publication does not purport to include all the necessary provisions of a contract Users are responsible for its correct application Compliance with a British Standard cannot confer immunity from legal obligations This British Standard was published under the authority of the Standards Policy and Strategy Committee on 17 November 2004 Amendmentscorrigenda issued since publication 31 July 2009 Implementation of CEN amendment A12009 BSI 2009 ISBN 978 0 580 65569 2 EUROPEAN STANDARD EN 10025-62004A1 NORME EUROPéENNE EUROPISCHE NORM May 2009 ICS com com Supersedes EN 10025-62004 English Version Hot rolled products of structural steels - Part 6 Technical delivery conditions for flat products of high yield strength structural steels in the quenched and tempered condition Produits laminés à chaud en aciers de construction - Partie Warmgewalzte Erzeugnisse aus Bausthlen - Teil 6 6 Conditions techniques de livraison pour produits plats en Technische Lieferbedi