微弱光信的光电检测系统设计外文翻译.docVIP

Photoelectric Detection System Designning of Weak Optical Signal Sun Lifei , Wang Zenglin (Jilin Abstract : detailed analysis of the photoelectric detection system components, expounded AD7714 chip in the photoelectric detection system, the application converter Finally the AD7714 and AT89C52 interface circuit, flowchart and key subroutine. Keyword: AD7714;89C52; Photoelectric detection system Foreword: photoelectric detection technology has been widely used in military, industrial, agricultural, and the universe, environmental science, health and other civilian areas. The use of modern technology as photoelectron detection means with no contact, non-destructive, long-range, anti-interference capability. Less affected by environment, testing speed, high precision measurement advantages of the present detection technology is the major trend. American companies AD D AD7714 chip is a charge balance Analog to Digital. Converter It uses-sampling conversion technology to achieve the 24 non-error analog signal modulation. It has high conversion accuracy, excellent static properties and the integrity of the front and simulation chip correction, particularly suitable for the measurement of low-frequency small-signal. This paper successfully applied to AD7714 photoelectric detection system, and has made good use of effects. This paper introduces the photoelectric detection system throughout the frame structure, then analyzes the PIN photodiode photoelectric detection circuit and AD7714 and microcontroller interface circuit, Finally process diagram. 1 A photoelectric detection system block diagram Photoelectric detection system block diagram shown in Figure 1, the optical signal through optical-electrical signal conversion circuit voltage signal to change, Analog to Digital Converters this voltage signal corresponding to the digital input of the microcontroller. SCM digital signal processing and the result will be displayed. To photoelectric signal converter circuit output vo