20120379-陕西中银大厦结构抗震性能化设计探讨-熊1.docVIP

陕西中银大厦连体结构抗震性能化设计探讨 辛 力， 王 敏， 曾凡生， 应向阳 （中国建筑西北设计研究院有限公司， 西安 710018） [摘要] 《建筑抗震设计规范》（GB 50011—2010）附录M英文没有，这个一定要么？要不把“附录M”删了吧。中介绍了实现结构抗震性能设计目标的参考方法，但目前受制于设计手段，实施起来面临较大困难。中银大厦采用的是框剪+钢桁架连体结构，设计中主体结构选用性能目标D，连体部分的连接支座选用性能目标C，连体结构选用性能目标B。通过理论推导，将规范所给的参考方法进行简化，推导出结构各性能目标相对于常规设计时的地震影响系数，通过修改地震影响系数值，实现不同性能目标结构的抗震设计。另外，高性能目标时，针对个别次要构件少量超筋而程序难以调节，适当降低了构件的 英文没有，这个一定要么？要不把“附录M”删了吧。 [关键词] 连体结构; 基于性能的抗震设计; 性能目标; 变形能力; 弹塑性时程分析 中图分类号：TU973+.31 文献标识码：A 文章编号： Research on performance-based seismic design method of Shaanxi Bank of China building in Shaanxi 这样也行 Xin Li, Wang 这样也行 （China Northwest Building Design Research Institute Co. , Ltd. , Xi’an 710018, China) Abstract: A proposed performance-based seismic design method is introduced in the Code for seismic design of building, but it’s difficult to implement under current calculation means. Towers linked with connective structures is used in the Bank of China Building, the performance objective of the main body is D, the bearing of the connective structures is C, and the connective structure is B. Based on the theoretical derivation, the amplification factor of base shear in each performance objective is deduced, and the method proposed by current code is simplified. In performance objective C and B, higher deformation capacity and lower bear capacity are designed for some element which is over reinforced, in order to ensure its energy dissipation capacity. Elastic-plastic time history analysis is used to evaluation the structural performance and the result proves the proposed method is effective. It provides a valuable thought to performance-based seismic design for the high-rise buildings. Keywords: towers linked with connective structure; performance-based seismic design; performance objective; deformation capacity; elastic-plastic time history analysis 0 引言 陕西中银大厦为复杂连体高层结构，连体高度高、跨度大，且两个塔体刚度极不均匀。根据震后损失及修复难易程度评估，对结构重点部位（如连体结构及连接支座等）选择较高的抗震性能目标，采用基于性能的抗震设计方法进行设计。目前，我国规范《建筑抗震设计规范》（GB 50011—2010）[1]（简称