ASTM：D1067-2006《水的酸性和碱性的测试方法》.pdfVIP

Designation: D 1067 – 06 An American National Standard Standard Test Methods for Acidity or Alkalinity of Water1 This standard is issued under the fixed designation D 1067; the number immediately following the designation indicates the year of original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A superscript epsilon () indicates an editorial change since the last revision or reapproval. This standard has been approved for use by agencies of the Department of Defense. 1. Scope* applications. When titrating to a selected end point dictated by 2 cover the determination of acidity practical considerations, (1) only a part of the actual neutral- 1.1 These test methods or alkalinity of all types of water. Three test methods are given izing capacity of the water may be measured, or (2) this as follows: capacity may actually be exceeded in arriving at optimum Sections acidity or alkalinity conditions. Test Method A (Electrometric Titration) 7 to 15 1.4 A scope section is provided in each test method as a Test Method B (Electrometric or Color-Change Titration) 16 to 24 guide. It is the responsibility of the analyst to determine the Test Method C (Color-Change Titration After Hydrogen 25 to 33 acceptability of these test methods for e