电能表通信规约一致性自动检测系统.doc

第44卷 第504期 电测与仪表 Vol.44 No.504 2007年 第12期 Electrical Measurement Instrumentation Dec.2007 PAGE 1 - 电能表通信规约一致性自动检测系统* 宫游1，刘惠颖1，殷鑫1，梁言贺1，吴琼2 （1. 国网黑龙江省电力科学研究院，哈尔滨 150000；2. 哈尔滨电工仪表研究所有限公司，哈尔滨 150028） 摘要：由于不同电表厂家对通信协议的使用和解释不一致，导致均采用通信规约DL/T698.45的电能表在通信方面也可能出现偏差。针对此情况设计了电能表面向对象互操作性数据交换协议的通信规约一致性检测系统。该系统采用主流的可视化界面开发工具，基于微软的Visual Studio2010平台开发，使用面向对象的方法，具有良好的通用性和扩展性。该检测系统能够有效甄别出不符合通信规约的电能表，为新通信协议在电能采集通信中的应用打下基础。 关键词：检测系统；通信规约；DL/T698.45 中图分类号：TM933 文献标识码：B 文章编号：1001-1390（2018）00-0000-00 Consistency automatic detection system of DL/T698.45 communication protocol detection system Gong You1, Liu Huiying1, Yin Xin1, Liang Yanhe1, Wu Qiong2 (1. State Grid Heilongjiang Electric Power Research Institute, Harbin 150000, China. 2. Harbin Research Institute of Electrical Instruments Instrumentation Co., Ltd, ., Harbin 150028, China) Abstract：Due to the inconsistency in the using utilization and interpretation of the protocol between different ammeter manufacturers, the communication of energy meters produced by communication protocol DL/T698.45 may also be deviant. In view of this, Aa communication protocol detection system for object-oriented data exchange protocol of power surface is designed to this situationin this paper. The system uses adopts mainstream visual interface development tools, based on Visual Studio2010 platform of Microsoft, using object-oriented methods, and owns good versatility and scalability through using object-oriented methods. The detection system can effectively identify the energy meters which do not conform to the communication protocol, and lay a solid foundation for the application of the new communication protocol in power collection and communication. Keywords：detection system, communication protocol, DL/T698.45 PAGE 5 0　引 言 针对现行用于电能采集的通信协议已经因各种厂家理解不同而很不统一，这导致电能采集通信过程中增加了大量不必要的规约转换工作[1-2]。需要对不