BIM与三维激光扫描技术在天津周大福金融中心幕墙工程逆向施工中的应用.doc

BIM与三维激光扫描技术在天津周大福 金融中心幕墙工程逆向施工中的应用 王代兵杨红岩邢亚飞王含坤李健 中国建筑第八工程局有限公司天津分公司 天津周大福金融屮心是530m的超高层建筑，结构内收外扩，塔楼幕墙造型多变, 板块类型多，施工难度大。8个“V”形口不同程度的变化勾勒出幕墙灵动变化 的特点，也呈现出曲面、异面等复杂形状;独特的建筑形式给现场施工以及幕墙 板块的生产加工带来很大困难。木工程利用BIM技术与三维激光扫描仪在幕墙的 深化设计、现场施工环节进行逆向设计、施工，提高了深化设计、生产施工的精 确度，节约了施工成本，实现了预期效果。 关键词： 高层建筑;建筑信息模型;三维扫描;逆向施工;点云模型;幕墙;施工技术; 王代兵，助理工程师， :HYPERLINK mailto:707513939@707513939@ 2017-07-06 基金:中建八局科技资助(2014-01) Application of BIM and 3D Laser Scanning Technology in Converse Construction of Curtain Wall in Tianjin CTF Financial Center Project WANG Daibing YANG Hongyan XING Yafei WANG Hankun LI Tian China Construction Eighth Engineering Division Co.，Ltd. (Tianjin); Abstract： Tianjin CTF Financial Center is a super tall building with 530 meters high. The internal structure of the tower contracts to the inside while the external structure expands outward. The shape of the tower curtain wall and the type of the curtain wall plates change a lot.八11 of these reasons lead to the difficulties in construction. Eight “V ’’ shape gaps with varying degrees of change sketch the characteristics of the dynamic changes in the curtain wall, and show the complex surface such as curved and different shapes. The unique form of construction brings great difficulties to on-site construction and the production and processing of curtain wall plates. This project used BIM technology and 3 D laser scanner to carry out reverse design and construction in the deepening design and on-site construction of the curtain wall， which improve the accuracy of deepening design and production construction, save the construction cost, and the expected result is achieved. Keyword： tall buildings; building information modeling (BIM) ; 3D scanning; converse construction; point cloud model; curtain wall; construction; Received： 2017—07-06 1工程概况 天津周大福金融中心位于天津滨海新区，工程总建筑而积约39万m，由4层地 下室、5层裙楼和100层塔楼组成，建筑总高度530m,工程采用超深基坑、桩筏 基础，塔楼采用形式多变的“型钢（钢管）混凝土框架-型钢混凝土核心筒结构 体系”。本工程塔楼幕墙共有约14 800个单元板块，其中，标准层单元板块约 12 700个，“V”形口 900个，塔冠1 200个，总幕墙面积约1