梁柱接头反覆载重行为之研究-中国土木水利工程学会.PDF

下载文档

0
0
约1.06万字
约 5页
2019-02-04 发布于天津
举报
版权申诉
保障服务

梁柱接头反覆载重行为之研究-中国土木水利工程学会.PDF

1、本文档共5页，可阅读全部内容。
2、原创力文档（book118）网站文档一经付费（服务费），不意味着购买了该文档的版权，仅供个人/单位学习、研究之用，不得用于商业用途，未经授权，严禁复制、发行、汇编、翻译或者网络传播等，侵权必究。
3、本站所有内容均由合作方或网友上传，本站不对文档的完整性、权威性及其观点立场正确性做任何保证或承诺！文档内容仅供研究参考，付费前请自行鉴别。如您付费，意味着您自己接受本站规则且自行承担风险，本站不退款、不进行额外附加服务；查看《如何避免下载的几个坑》。如果您已付费下载过本站文档，您可以点击这里二次下载。
4、如文档侵犯商业秘密、侵犯著作权、侵犯人身权等，请点击“版权申诉”（推荐），也可以打举报电话：400-050-0827(电话支持时间：9:00-18:30)。

梁柱接头反覆载重行为之研究-中国土木水利工程学会

beam-to-column welded joints. This research found that the water-cooled specimen fractured at the weld metal or the HAZ. The reason is that the weld metal strength was lower than the base metal strength after the beam-to-column welded cruciform joint specimen 900C with the temperature higher than A1 transformation 900C temperature (723C) was water-quenched. A 723C 1 Abstract In order to study the post-fire mechanical behav- iors and failure modes of the steel beam-to-column welded joints under cyclic loadings, this research fab- ricated three beam-to-column welded cruciform joint specimens. The three specimens experienced three different temperature treatments, which were room- temperature treating, air-cooling after reaching 900C and water-cooling after reaching 900C, respectively to simulate the possible material property variations of weld metal and base metal in the beam-to-column w