- 1、原创力文档(book118)网站文档一经付费(服务费),不意味着购买了该文档的版权,仅供个人/单位学习、研究之用,不得用于商业用途,未经授权,严禁复制、发行、汇编、翻译或者网络传播等,侵权必究。。
- 2、本站所有内容均由合作方或网友上传,本站不对文档的完整性、权威性及其观点立场正确性做任何保证或承诺!文档内容仅供研究参考,付费前请自行鉴别。如您付费,意味着您自己接受本站规则且自行承担风险,本站不退款、不进行额外附加服务;查看《如何避免下载的几个坑》。如果您已付费下载过本站文档,您可以点击 这里二次下载。
- 3、如文档侵犯商业秘密、侵犯著作权、侵犯人身权等,请点击“版权申诉”(推荐),也可以打举报电话:400-050-0827(电话支持时间:9:00-18:30)。
查看更多
烧结锶铁氧体的极图分析
· 748 · 硅 酸 盐 学 报 2011 年
第 39 卷第 5 期 硅 酸 盐 学 报 Vol. 39 ,No. 5
2 0 1 1 年 5 月 JOURNAL OF THE CHINESE CERAMIC SOCIETY M a y , 2 0 1 1
烧结锶铁氧体的极图分析
1,2 1 1 1 2 1
朱存福 ,金鸣林 ,王占勇 ,刘克家 ,包宗宏 ,蒋涵涵
(1. 上海应用技术学院材料科学与工程学院,上海 200235 ;2. 南京工业大学化学工程学院,南京 210009)
摘 要:将不同强度取向磁场下湿压成型的生坯在 1 190 ℃烧结 2 h ,获得锶铁氧体烧结磁体。采用 X 射线极图分析样品的织构取向特征,根据
Stoner–Wohlfarth 模型,建立了描述取向度的表示方法。分析表明:在磁场下成型的样品{001}晶面族衍射峰强度显著增强。用(008) 晶面极图描述磁体
取向度时,随取向磁场强度的增大,晶粒取向逐渐增强,当磁场强度为 600 kA/m 时,取向度达 78.3%,锶铁氧体的磁性能明显提高。此外,(107)晶
面的极图也被尝试用来描述磁体的织构特征。
关键词:锶铁氧体;极图;取向
中图分类号:O72 文献标志码:A 文章编号:0454–5648(2011)05–0748–05
Pole Figure Analysis of Sintered Strontium Ferrite
ZHU Cunfu1,2 1 1 1 2 1
,JIN Minglin ,WANG Zhanyong ,LIU Kejia ,BAO Zonghong ,JIANG Hanhan
(1. Department of Material Science and Engineering, Shanghai Institute of Technology, Shanghai 200235; 2. College of
Chemistry and Chemical Engineering, Nanjing University of Technology, Nanjing 210009, China)
Abstract: Sintered strontium ferrites were prepared by wet compaction under different applied magnetic fields and sintered at 1 190
℃ for 2 h. An X-ray pole figure was used to analyse the texture character of the magnets. The method to describe the alignment de-
gree was proposed based on the Stoner–Wohlfarth model. Diffraction intensity of {001} crystal planes for the samples with magnetic
compact is higher than that without magnetic field applied. It is indicated that the (008) pole figure can be used to measure alignment
degree of these s
文档评论(0)