ZigBee家庭自动化网络的测量与传感节点的设计与实现①.PDFVIP

2013 年 第 22 卷 第 3 期 计 算 机 系 统 应 用 ZigBee 家庭自动化网络的测量与传感节点的设计与 ① 实现 吕君可 (浙江师范大学 行知学院, 金华 321004) 摘 要: ZigBee 的家庭自动化 （HA ）网络是智能家居系统发展的一个方向. 在对 HA 应用子集中的测量与传感簇 的工作特性和属性报告机制进行详细分析后,给出了一种基于Z-Stack 的符合HA 规范的测量与传感类终端节点的 设计方案. 该方案, 硬件结构采用模块化设计, 配以不同的传感器模块实现不同类型物理量的测量. 软件上, 以 Z-Stack 协议栈为基础, 通过建立新的 ZCL 应用来实现节点功能, 并利用属性报告机制实现测量与传感的属性的 传送. 最后, 以一光传感器节点设备为实例, 进行了方案的验证. 实践验证表明, 该设计方案切实可行, 适用于 HA 网络的测量与传感节点设备的设计. 关键词: ZigBee; 家庭自动化; 测量与传感; Z-Stack; Design and Implementation of Measurement and Sensing Node of ZigBee Home Automation Network LV Jun-Ke (Xingzhi College, Zhejiang Normal University, Jinhua 321004, China) Abstract: ZigBee Home Automation (HA) network is a direction in the development of intelligent home system. After the detailed analysis about the characteristics of Measurement and Sensing clusters and the attribute report mechanism of ZigBee HA profile, this paper presents a design proposal concerning measurement and sensing terminal nodes based on Z-Stack protocol stack. In this proposal, the hardware mechanics of measurement and sensing nodes adopt modular form design, and meanwhile the measurement of different physical types is realized by means of different sensor modules. Based on Z-Stack protocol stack, the software achieves the terminal node function by creating a new ZCL application, with the realization of the transmission of the attribute value of measurement and sensing cluster by using of the attribute report mechanism. Finally, the proposal is confirmed by a light sensor device. The empirical study indicates that this design proposal is feasible and applicable to the measurement and sensing terminal nodes of ZigBee HA network. Key words: ZigBee; home