控制系统i身c应用.ppt

核心元器件产品 盛涛 工控元器件产品业务经理，北区 Infrastructure for the Architecture Infrastructure for the Architecture- Power Supply Applications Power Supply Selection Redundancy Where is a DC Power Supply placed in the control circuit and how much does it cost? 1606开关电源 Success Story – Size Matters Background OEM who makes snowmaking equipment was looking for a solution to reduce their overall panel cost. This panel was very costly due to the 4X requirement of the enclosure. They have standardized on Rockwell power supplies and currently use the 1606-XL240E Solution By changing to the 1606-XLS240E, they were able to downsize their enclosure from a 36x36 to a 36x30 which resulted in a $200 savings to the stainless steel enclosure The cost difference of the XLS power supply is 12% over the XL which resulted in a net difference of $28 (book pricing) Success Story – Hazardous Location Background Customer has a requirement for a 10 amp 1+1 redundant application with a Class I, Div 2 rating for hazardous locations. Solution Prior to the release of the XLS Performance Line, we did not have a solution that met the customer’s requirement The closest solution: Use the 1606-XLPRED decoupling module, but limited to 16A max output or 2 x 8A input XLS Solution Use (2) 1606-XLS240E or 1606-XL240E with (1) 1606-XLSRED decoupling module 1606-XLSRED can accept 2 x 10A input with a max output of 25A Success Story – Reserve Power Background Customer has a conveyor application where one power supply is providing power to 4 motors and a controller The 4 motors never “peak” simultaneously, occur during a 4 sec interval Power Requirem