采用硅光电池实现光照度计电路设计分析.docVIP

.. 资料 采用硅光电池实现光照度计 电路设计和分析 作者姓名：# # # 专业名称：应 用 物 理 学 指导教师：# # # 讲师 .. 资料 摘要 本文通过理论分析与数值比对来确定光照强弱与光电池输出光电信号的关系，并且通过这种关系设计了相应的光电检测电路，更直观展现光伏技术在实际生活中的应用。 随着光伏技术的日渐成熟以及应用的扩展，对光照的研究也日新月异。所以对如何更加准确的测定光照参数也提出了更高的要求。针对不同的要求，如何快速设计出对应的光电探测器，又有了新的课题。本文在此背景下，进行了光照度计电路的设计与分析。 本论文共分四部分：第一部分为光电池特性介绍及实验特性参数，第二部分为电路方案设计和电路实现，第三部分为利用Protel 99SE进行电路设计，第四部分为电路实物制作与调试。 关键词 ：光电池 转换电路 光电效应 伏安特性 Abstract A comparsion between analysis theory and numerical ratio, which can determine the relationship between the intensity of illumination and optical signal of photocell output in this paper. And we design a corresponding circuit of photoelectric detection by the relationship showing the application of photoelectric technology in our daily life. With the development and widespread of photoelectric technology, fracture treatment has been changing quickly. So there have more high requirements about how to determine the parameter of the light more exactly. As for different requirements, it is a new project to design the corresponding electrophptonic detector. Under this background, this paper discuss design and analysis of the circuit of light meter. There are four parts in this paper：In the first part, it introduce the character of photoelectric cell and characteristic parameter of experiment. The second part is about designing scheme of circuit and realizing the circuit, The third part is using Protel 99SE to design circuit, The fourth part is to manufacture and adjust the circuit. Keywords: Potoelectric cell, Conversion circuit,Photoelectric effect, Volt-Ampere characteristic 目录 TOC \o 1-3 \h \z \u HYPERLINK \l _Toc387768581 摘要 PAGEREF _Toc387768581 \h I HYPERLINK \l _Toc387768582 Abstract PAGEREF _Toc387768582 \h II HYPERLINK \l _Toc387768583 目录 PAGEREF _Toc387768583 \h III HYPERLINK \l _Toc387768584 前言 PAGEREF _Toc387768584 \h 1 HYPERLINK \l _Toc387768585 1 光伏技术的发展历程简介 PAGEREF _Toc387768585 \h 2 HYPERLINK \l _Toc387768586 1.1 光伏技术的历程 PAGEREF _Toc3877685