《基于Flexsim的自动化立体仓库仿真》-毕业论文（设计）.doc

. . 装订线 装 订 线 题目：基于Flexsim的自动化立体仓库 仿真设计　　 　　　　　　　　　　　　 　 . 基于Flexsim的自动化立体仓库仿真设计 摘　　要 随着计算机信息技术的发展和竞争的日益加剧，市场对企业物流系统提出了新的要求，自动化立体仓库受到了越来大的关注并得到广泛应用。其运营效率的研究也成为企业关注的焦点。Flexsim软件针对离散系统的建模和仿真，是自动化立体仓库仿真规划的理想选择。物流仿真利用计算机技术来模拟真实的物流系统，通过仿真活动和过程来验证物流项目建设的有效性，合理性和优化的效果。本文以一个公司的自动化立体仓库为例，根据自动化立体仓库基本组成和工作过程，进一步探究采用Flexsim软件进行建模仿真的一般方法。通过仿真自动化立体仓库物流系统，对仓库物流过程进行整体分析。根据各部分不同的运行特点，对仿真的整个流程进行研究，找出其不合理的地方并对其进行优化，结果显示优化后仓库作业效率得到提高。 关键词：自动化立体仓库；Flexsim；建模；仿真 AS/RS Simulation Design Based on Flexsim ABSTRACT With the development of computer information technology and the increasing competition, market has put new demands on enterprise logistics system and the AS/RS is paid more and more attention and widely used. The research of its operational efficiency has also become the focus of enterprise. Flexsim software, which is for discrete system modeling and simulation, is a good choice for AS/RS simulation planning. Logistics simulation use computer technology to simulate the real logistics system through simulation activities and processes and then verify that the construction of the logistics project effectiveness, rationality and optimization of the effect. This paper takes an automated warehouse of one company as an example to further explore the general method of using the Flexsim modeling and simulation, based on the basic components and work processes of the AS/RS. Warehouse logistics process is analyzed as a whole through the simulation of AS/RS logistics. Based on the various operating characteristics, researched on the simulation of the overall process, identified the unreasonable place and then optimized it, the results show that the efficiency of warehouse operations is improved after optimization. Key words: AS/RS; Flexsim; Modeling; Simulation 目　　录 　　 TOC \o 1-3 \h \z \u HYPERLINK \l _Toc357063601 1　前言 PAGEREF _Toc357063601 \h 1 HYPERLINK \l _Toc357063602 1.1　课题的来源及意义 PAGEREF _Toc357063602 \h 1 HYPERLINK