《MTT227-2005-高温燃烧中和法测硫仪通用技术条件》.pdfVIP

ICS 73.040 D 21 备案号 :15501-2005 MT 中华 人 民共 和 国煤 炭 行 业标 准 MT/T227-2005 代 替MT/T 227- 1990 高温燃烧中和法测硫仪通用技术条件 Generalspecificationsfordeterminatorofsulfurbyhigh temperaturecombustionneutralizationmethod 2005-02-14发布 2005-06-01实施 国家发展和改革委员会 发 布 MT/T 227-2005 目 次 前言 ···········································。·。·································································…… II 1 范 围 ··········································。············，·························。······················…… 1 2 规范性引用文件 ··················································.··。·····.·.··..·…… 1 3 技术要求 ······························‘······················，················，········…… “·‘1 4 试验方法 ······································································································一 2 5 检验规则 ···················。·················································································…… 3 6标志、包装、运输和贮存 ····································································……4 MT/T 227-2005 前 言 本标准是对MT/T227-1990《煤中全硫高温燃烧测定仪技术条件》的修订。 本标准与MT/T227-199。相比，主要变化为: — 标准名称改为高温燃烧中和法测硫仪技术条件; — 燃烧管气密性检查，199。版按GB/T214第3.3.3进行，本标准直接在4.1中列出; — 恒温带的测定，199。版按GB/T214第3.3.2进行，本标准直接在4.5中列出; — 判定规则作相应变化(1990版5.2.3，本标准5.2.3), 本标准由中国煤炭工业协会科技发展部提出。 本标准由全国煤炭标准化技术委员会归口。 本标准起草单位:煤炭科学研究总院煤炭分析实验室。 本标准主要起草人:施玉英、陈爱莉。 本标准所代替标准的历次版本发布情况为: — MT/T227-1990. MT/T 227-2005 高温燃烧中和法