TI LM5160A宽输入三相逆变器电源参考设计.docVIP

TI LM5160A宽输入三相逆变器电源参考设计 时间：2015-03-30 17:33:38?????? 作者：TI?????? 来源：中电网 TI公司的LM5160A系列产品是集成了高边和低边MOSFET的65V 1,5A同步降压转换器,负载电流1.5A,不需要外接回路补偿,快速瞬态响应,可选择CCM或DCM工作,频率可调高达1MHz,具有热关断保护,主要用于工业PLC, IGBT栅极驱动电源,低功率隔离DC/DC转换器(Fly-Buck),汽车电子,通信初级/次级偏压电源,动力线通信等.本文介绍了LM5160A 主要特性,功能框图,几种应用电路,以及三相逆变器电源参考设计主要特性,系统框图,电路图,材料清单和PCB元件布局图.The LM5160 family is a 65-V, 1.5-A synchronous step-down converter with integrated high-side and low-side MOSFETs. The constant-on-time control scheme requires no loop compensation and supports high step-down ratios with fast transient response. An internal feedback amplifier maintains ±1% output voltage regulation over the entire operating temperature range. The on-time varies inversely with input voltage resulting in nearly constant switching frequency. Peak and valley current limit circuits protect against overload conditions. The under-voltage lockout (EN/UVLO) circuit provides independently adjustable input under-voltage threshold and hysteresis. The LM5160 is programmed through the FPWM pin to operate in continuous conduction mode (CCM) from no load to full load or to automatically switch to discontinuous conduction mode (DCM) at light load for higher efficiency. Forced CCM operation supports multiple output and isolated Fly-Buck applications using a coupled inductor.?The LM5160A shares the same features and pin configuration as the LM5160. An external bias supply can be connected to the VCC pin of the LM5160A in either Buck or Fly-Buck applications. This additional capability can improve efficiency at high input voltages.LM5160A主要特性:Wide 4.5-V to 65-V Input Voltage RangeIntegrated High and Low Side Switches?No Schottky Diode Required1.5-A Maximum Load CurrentConstant On-Time Control?No External Loop CompensationFast Transient ResponseSelectable Forced CCM or DCM OperationCCM Option Supports Multi-Output Fly-BuckNearly Constant Switching FrequencyFrequency Adjustable up to 1 MHzProgrammable Soft-Start TimePre-Biased StartupPe