cfrp加固带缺陷钢结构的界面应力有限元分析工程力学专业论文.docxVIP

广东工业大学硕士学位论文界面应力没有影响，而会降低极限荷载。同时提高CFRP板的弹性模量和厚度将导致 广东工业大学硕士学位论文 界面应力没有影响，而会降低极限荷载。同时提高CFRP板的弹性模量和厚度将导致 边贴加固方式B的粘结层提早发生软化，而对开裂荷载和极限荷载的影响很小。 关键词：有限元分析；界面应力；CFRP板；缺陷钢梁；缺陷钢板 木本文工作属于国家自然科学基金项目(编号的部分研究内容。 万方数据 AB AB STRACT When carbon fiber reinforced polymer(CFRP)was used in the notched steel structure reinforcement projects，leading to structural failure due to the degradation of the adhesive layer．According to the tese model of notched steel beams strengthed with CFRP plate and the test model of notched steel plates strengthed with CFRP plate，the finite element model has proposed in ABAQUS．In the proposed finite element model，a mixed。mode cohesive law is employed to depict adhesive behavior．And adhesive of the finite element model simulated based on cohesive element in ABAQUS．Comparions of the capacity and interfacial crack propagation law of experimental and finite element model．And a parametric study on finite element model of notched steel beams strengthed with CFRP plate and notched steel plates strengthed with CFRP plate．The main contents and conclusions can be seen as follow： Firstly,the finite element model of notched steel beams strengthed with CFRP plate is proposed．The good agreement between the load—deflection curve and the longitudinal strain distribution in the CFRP plate of experimental and finite element model．The results show that the failure mode of the finite element model of notched steel beams strengthed with CFRP plate is first generated the interfacial crack at the notch position，and to extend the plate end．It is consistent with the test phenomena．Debonding load deviation of finite element results and the test results iS small．The maximum deviation of the ultimate load iS less than 6．0％．It shows that the finite element model has good accuracy,the result is reliable． Secondly,for notched steel beams strengthed with CFRP plate，the important ones are the crack depth，CFRP elastic modulus and the thickness of CFRP．These parameters were studie