成样方法及应力路径对饱和中密细砂剪切特性影响岩土工程专业论文.docxVIP

成样方法及应力路径对饱和中密细砂CU剪切特性影响Influence 成样方法及应力路径对饱和中密细砂CU剪切特性影响 Influence of sampling method and stress path on the consolidate 一 Un-grained Sllear behaVlor ot Satl lrated medlUm density fine Sand Abstract Tri—axial test plays all important role in laboratory experiment，it’S a very valuable tool to measure the soil shear StreII酵h index and study the constitutive model of soil．But in tri-axial experiments，in the absence of other limiting factors，it Was found that the experiment results varies in different stress loading paths and the experiment results Was influenced by the sampling methods，these caused great inconvenience to the relevant research．So it’S essential to undertaken the specific study of the influence of sampling methods and stress path on the shear response of sand samples． Firstly，the consolidation drained and un-drained shear tests were conducted on saturated fine sand of 50％relative density prepared by dry-r印ping method and wet tamping method under three stress paths of conventional tri-axial compression CTC，constant stress tri-axial compression TC，reduced tri-axial compression RTC．The test results shown that the sampling methods have a great influence on the shear response of sand，under the same stress path test， the peak deviator stress and effective shear strength index of specimens prepared by dry·-rapping method are obviously higher than those prepared by moist··tamping method； Stress loading path have a great influence on the shear rehouse of sand，for the samples prepared by the same method，the peak deviator stress in different stress path test is different， ranked as CTCTCRTC，and the degree of contractive behavior of specimens showed in different stress path test is different，ranked as RTCTCCTC．During the experiment，we recognized some kind of cross—relation exists between sampling method and stress loading path． Besides，the consolidation un-drained conventional仃i—axial compression tests were conducted on medium sand、fine sand and silty sand，the s