利用温度梯度分析COREX熔化气化炉内区域.pdf

第32 卷第8期 东 北 大 学 学 报 ( 自 然 科 学 版 ) Vol32, No. 8 201 1 年 8 月 Journal of Northeastern U niversity( Natural cience) Aug. 2 0 1 1 COREX 1 1 2 3 周晓雷, 韩立浩, 王 祺 , 余艾冰 ( 1. , 110819; 2. , 250101; 3. , 2052) : COREX ; , , , , COREX , : ; COREX ; ; ; : TF 557 : A : 2011) Analysis of Zones in COREX Melter Gasifier by Temperature Gradient 1 1 2 3 ZH O UX iaolei , HAN L ihao , WANG Qi , YU Aibing ( 1. chool of Materials Metallurgy, Northeastern University, henyang 110819, China; 2. handong Province Metallurgical Engineering Co . , Ltd. , Jinan 250101, China; 3. chool of Materials cience and Engineering, University of New outh Wales, ydney 2052, Australia. Corresponding author: ZHOU Xiaolei, Email: zhouxiaolei81 @ 163. com) Abstract: A physical thermal model of COREX melter gasifier w as established. The data of the air temperatures in this model were measured w ith temperature sensors under different experimental conditions. The temperature gradient could be obtained by processing the data of the air temperatures in this model. T he results show ed that the packed bed, cohesive zone, drip zone and racew ay in the melter gasifier could be roughly distinguished by analyzing temperature gradient along the vertical direction. T he zones in the COREX melter gasifier could be described objectively by the method so as to analyze the impact of the operating conditions on the zones in the future studies. Key words: temperature gradient; COREX melter gasifier; thermal model; cohesive zone; r