变电站分裂导线弯曲性能研究-中国电机工程学报.PDF

第38 卷 第15 期 中 国 电 机 工 程 学 报 Vol.38 No.15 Aug. 5, 2018 2018 年8 月5 日 Proceedings of the CSEE ©2018 Chin.Soc.for Elec.Eng. 4585 DOI ：10.13334/j.0258-8013.pcsee.171961 文章编号：0258-8013 (2018) 15-4585-08 中图分类号：TM 24 变电站分裂导线弯曲性能研究 1 1 1 2 2 何畅 ，谢强 ，杨振宇 ，郝群岩 ，余波 (1．同济大学建筑工程系，上海市 杨浦区 200092 ；2．西南电力设计院有限公司，四川省 成都市 610021) Flexural Properties of Bundled Conductors in Substations 1 1 1 2 2 HE Chang , XIE Qiang , YANG Zhenyu , HAO Qunyan , YU Bo (1. Department of Structural Engineering, Tongji University, Yangpu District, Shanghai 200092, China; 2. Southwest Electrical Power Design Institute, Chengdu 610021, Sichuan Province, China) ABSTRACT: The flexural mechanical properties of bundled 0 引言 conductors in substations have great influence on the seismic 采用软导线连接变电站的不同电气设备，能较 responses of coupling electrical equipment. To obtain the flexural mechanical properties of bundled conductor as the 好地适应设备在地震作用下的相对位移。但当导线 bending stiffness of sub-conductors were concerned, a flexural 冗余度不足时，导线中产生的拉力可能引起电气设 mechanism model of bundled conductor based on chained 备的破坏[1] 。汶川地震震后调查表明，设备间软导 beam-constraint-model (CBCM) was established in this paper. 线牵拉作用是引起设备破坏的主要原因之一[2] 。 Based on CBCM, the influence of concentrated forces, the 1978 年日本宫城地震后，有学者研究发现需要 constraint effects of spacers and the geometric constraints were considered in the bundled conductor flexural mechanism model. 考虑软导线对设备地震响应的影响[3-4] 。1988 年的 Several