JFZ-30Q切换并列箱说明书0SF.459.036_V 1.0E.docVIP

JFZ-12D 分相操作箱(上海专用) 说明书 3 - Sifang Sifang Manual for JFZ-30Q Switching Parallel Unit Manual Box  JFZ-30Q Switching parallel box Unit ManualManual Compiled:Prepared by: Shi Wenhao Checked by: Bao Liyong StandardizedStandardization censor: Zhen Wei InspectedApproved by: Xu Gang VersionPublishing number: V1.0 Doc. CodeDocument code: 0SF.459.036(E) Issued DatePublishing date: Oct of06 Copyright owner: Beijing Sifang Automation Co., Ltd. Note: the company keeps the right to perfect the instruction. If products do not agree with the instruction at anywhere, please contact our company in time. We will provide you with corresponding service. Technical support Tel: 010 Faxes: 010Copyright owned by: Beijing Sifang Automation Co., Ltd Note: This company reserves the right of the modification to the manual. If the product is not consistent to the manual, please contact us in time, and we will offer corresponding service to you. Technical support: phone: 010 Fax: 010Important noticeprompts Thank you for using products of Beijing Sifang Automation Co., Ltd. In order to safely, correctly and efficiently use the equipment, please do pay attention to following important prompts: Thank you for using the products of the Beijing Sifang Automation Co., Ltd. In order to securely, correctly and efficiently use this unit, please notice the following important notice: This instruction manual is only applicable to JFZ-30Q switching parallel boxunit. Please read this manual carefully and adjust, test and operate as per the regulations in the manual. If the accompanying information is offered, please refer to the accompanying information. To prevent the unit from damage, it is prohibited to hot plug various plug-inschip and contact the chips and parts component in the printing circuit board with the current. Please use the qualified testing instrument and the device for