集中典型测量工程技术解决方案.docVIP

PAGE PAGE II 西安科技大学 毕业设计(论文) 题 目 集中典型测量工程的技术解决方案 院、系(部) 测绘科学与技术学院 专业及班级 测绘工程0503班 姓 名 潘和云 指 导 教 师 胡荣明 日 期 200 摘 要 论文研究的是公路、铁路等线状控制网的建立，以及在线路中桥梁等专用控制网与两侧线路的连接，由于桥梁控制网有一个坐标，线路联测有一个坐标，所以要进行平面坐标的转换。在城市规划测量中建筑物的竣工测量是及其重要的一点，竣工测量是建筑物竣工后所进行的一项城市规划实施管理阶段的测量工作，论文对其精度要求和质量控制进行了讨论。对于建筑物多为矩形、且布置比较规则的密集的工业场地，可将施工控制网布置成规则的矩形格网，即所谓建筑方格网，论文对建筑方格网的测量进行了一系列的讨论。 关键词：控制网建立，平面坐标转换，竣工测量，建筑方格网 ABSTRACT Thesis research is road, rail line, such as control networks, as well as to act as a bridge circuit with a dedicated control network connecting both sides of the line, because there is a bridge control network coordinates, line coordinates have a joint test, it should be flat coordinates conversion.Measurement of urban planning in the completion of the building and its measurement is important, the completion of the building after completion of measurement is carried out by an urban planning phase of the implementation of the management of work measurement, the accuracy of their thesis requirements and quality control were studied. For most of the rectangular building, and compare the rules of layout-intensive industrial sites, construction control network can be arranged into a rectangular grid rules, the so-called Grid Architecture, Grid architecture thesis on the measurement carried out a series of discussion. KEY WORDS：Control Network, Plane Coordinate Transformation, Completion of measurement, Grid construction 目录 TOC \o 1-3 \h \z \u HYPERLINK \l _Toc231554010 第1章 绪论 PAGEREF _Toc231554010 \h 1 HYPERLINK \l _Toc231554011 1.1研究背景 PAGEREF _Toc231554011 \h 1 HYPERLINK \l _Toc231554012 1.2国内外研究现状 PAGEREF _Toc231554012 \h 1 HYPERLINK \l _Toc231554013 1.3研究内容 PAGEREF _Toc231554013 \h 3 HYPERLINK \l _Toc231554014 第2章 线状工程控制网的建立 PAGEREF _Toc231554014 \h 5 HYPERLINK \l _Toc231554015 2.1控制资料的分析与投影面与投影带的选择 PAGEREF _Toc231554015 \h 5 HYPERLINK \l _Toc231554016 2.2布网方案的设计 PAGEREF _Toc2