常用类型说明书液压甲板起重机(高速型).doc

PAGE CONTENTS目录 Principal particulars and working condition 主要参数及工作条件P1 Construction 结构P2 Safety device安全装置P8 Crane equipments 起重机设备P9 Spare parts and tools备件和工具P10 Paint油漆P11 Shop test工厂测试P12 Scope of supply供货范围P13 Drawings and documents to be forwarded图纸和资料P15 Reservation of design change设计变更P16 Warranty质保期P16 * This specification was prepared in accordance with the customer’s purchase specification and our standard specification. 本说明书基于客户要求以及工厂标准制定。 * For any item not specified in this specification, re-estimation is to be made by consulting with the customer. 对于本说明书未提到的事项，需与客户协商。 P2 Construction 结构 The deck crane is to be designed with the construction and main materials in accordance with the Classification Rule and JIS standards, and to be manufactured in accordance with the approved general assembly drawing. 吊机的结构和主要材料按照船级社标准和JIS标准设计，并且生产的产品与提交给客户的确认图保持一致。 2-1 Machinery equipment 机械设备 (1) Hosting and luffing winches 上卷和俯仰（变幅）卷扬机 These winches are accommodated in the crane housing with the state of the luffing winch installed over the hoisting winch. 卷扬机组安装在吊机机械室内，其中俯仰卷扬机安装在上卷卷扬机之上。 These winch drums can be driven by the hydraulic motor through planetary reduction gear. The reduction gear is in the enclosed casing and lubricated by oil bathing. 液压马达通过行星减速机驱动卷扬机滚筒，减速机采用封闭油浴式润滑设计。 Each winch has spherical roller bearing to improve efficiency. 每个卷扬机均采用球面滚柱轴承来提高效率。 In addition, as the winch drum is grooved, the wire rope can be wound regularly on the drum.卷扬机滚筒加工有凹槽，缆绳可以规则地缠绕在滚筒上。 The braking system has two (2) systems, one is hydraulic blocking system (counter balance valve) and the other is hydraulic disc braking system. Hoisting winch is provided with a pinch roller. 制动系统分为两个系统：液压制动系统（反平衡阀）和液压盘式制动系统。起升卷扬机附有压带轮。 (2) Slewing device 回转装置 This crane is installed on the turn table bearing which is subject to the overturning moment and thrusting load at the same time. 起重机安装在转台轴承