生物耗氧BOD测定仪.docVIP

BOD5测定仪 使 用 安 装 说 明 泰州市奥普特分析仪器有限公司 TaiZhou City AoPuTe Analysis Instruments Co. Ltd. ? V, installation and use (A) preparatory work 1?、?Opening inspection, according to packing list to check host?And Deputy?And accessories are complete. 2?Experimental power meets the technical requirements of the equipment, checking, AC voltage stabilizer should be used when necessary. 3?And to ensure the safety and equipment working properly, power outlet must provide reliable grounding wire. (B) the hosting panel and the use of function keys Host consists of nine digital three display Windows, runtime display?Channel number?、?BOD?Measured values?（?mg/L?） Running time (h), and is otherwise defined when setting parameters (see the following entry).?Keyboards by ten function keys and the ten digit keys, which operates eight above the eight function keys to the left of led light prompted the current operations, this may also determine what instruments are in working condition. 1、?Start: set all the parameters, press this key in the reset State, the instrument into action started. 2、?Reset: while the instrument is running (that is, in the course of the experiment) by pressing this button, this experiment will be terminated, and clear the saved The experimental data (Note:?After the end of the experiment?Pressing this key, you no longer print provides data and curves); in the process of setting parameters by pressing this button, when confirmed by the carriage return is input parameter will be stored and returned to position to further action. 3?、 Adjustment: commissioning, calibration, and maintenance of the factory. 4、 inoculated: press this key to display P- and saved the inoculation percentage points, with the numeric keys and the Enter key to enter a new percentage of inoculation of sample fluids. 5?, Range: press this key to display L-, press this key to display?1~8?-channel quantum setting values that are stored, with the number keys, and the Enter key to set the new span value