人工温湿度环境模拟室构建研究【毕业论文】.doc

- PAGE I - 本科毕业设计 （20 届） 人工温湿度环境模拟室构建研究 所在学院 专业班级 通信工程 学生姓名 学号 指导教师 职称 完成日期 年 月 PAGE I 摘　要 【摘要】我国在发展经济的同时也加快了电力工程的建设，由此带来了电力设备电晕放电的危害。然而，在户外对电晕放电现象的研究会带来不易找到测试点、实验周期长、代价高等问题。针对这些问题，本设计提出了温湿度环境模拟室的方案。本设计从温湿度控制的实现、模块的布局以及零件装配等方面出发来完成模拟室的构建，通过传热学、绝对湿度和相对湿度等一些基本原理及概念，对加热器的功率以及加湿器的加湿量进行计算从而指导如何选择加热器和加湿器；经过各种传感器之间的性能比较，选购了型号为THC70的温湿度控制模块及相应的温湿度传感器。经过测试，本设计基本满足温湿度控制的要求，为电晕放电现象的研究带来了方便。 【关键词】电晕放电；模拟室；导热；温湿度均匀性。  Abstract 【ABSTRACT】With the development of the countrys economy, the construction of electric power engineering has been sped up, bringing the harm of corona discharge of power equipment. However, the outdoor researches on corona discharge have problems such as the difficulty in finding test points, long experimental period and high cost. In order to solve these problems, this design proposes a scheme of the construction of an artificial temperature and humidity simulation chamber. This design was finished in the aspects of the implementation of temperature and humidity control, module layout and part assembly. With the fundamental principles and concepts of heat transfer theory, absolute humidity and relative humidity, the heater power and the humidification of humidifier were computed, thus leading to how to choose heater and humidifier. Comparing with different sensors, we selected the module THC70 of temperature and humidity control and the corresponding temperature and humidity sensors. After testing, this design fundamentally satisfied the requirements of temperature and humidity control, making the researches on corona discharge proceed more conveniently. 【KEYWORDS】corona discharge; simulation chamber; heat conducting; the uniformity of temperature and humidity. 目　录 TOC 1 引 言 PAGEREF _Toc5758 1 2 模拟室的整体构建基础 PAGEREF _Toc18837 3 2.1 模拟室的构建前提及依据 PAGEREF _Toc32584 3 2.2 模拟室的体积设计 PAGEREF _Toc2744 3 2.3 模拟室的材料选择 PAGEREF _Toc22143 4 2.