Android实战－利用Binder Service实现累加器.pptVIP

Android实战 － 利用Binder Service实现累加器CMY 内容提要 概述 Binder的流程可参考这篇文档： 《Android Binder IPC system》 先来看一下最终程序运行的效果图： 实现Binder Service 在cupcake/frameworks/base目录下新建两个目录，一个实现Binder Service，一个实现将我们的Binder Service添加到Service Manager： libSimpleCalculator libSimpleCalculator实现了Binder Service 它由以下几个文件组成： 这些文件实现如下几个类： ISimpleCalculator 接口类 BpSimpleCalculator client能够获取到的类 BnSimpleCalculator 实现具体功能 SimpleCalculator 同上 ISimpleCalculator.h class ISimpleCalculator : public IInterface { public: DECLARE_META_INTERFACE(SimpleCalculator); virtual int addValue(const int32_t iValue) = 0; virtual int getValue() const = 0; }; class BnSimpleCalculator : public BnInterfaceISimpleCalculator { public: BnSimpleCalculator(); ~BnSimpleCalculator(); virtual status_t onTransact( uint32_t code, const Parcel data, Parcel *reply, uint32_t flags = 0); }; ISimpleCalculator.cpp enum{ ADD_VALUE = IBinder::FIRST_CALL_TRANSACTION, GET_VALUE, }; class BpSimpleCalculator : public BpInterfaceISimpleCalculator { ….. virtual int getValue() const { LOGI( BpSimpleCalculator::getValue \n); Parcel data, reply; remote()-transact(GET_VALUE, data, reply); return reply.readInt32(); } ….. } IMPLEMENT_META_INTERFACE(SimpleCalculator, android.SimpleCalculator); status_t BnSimpleCalculator::onTransact(uint32_t code, const Parcel data, Parcel* reply, uint32_t flags) { switch(code) { case GET_VALUE: LOGI( BnSimpleCalculator::onTransact - GET_VALUE \n); reply-writeInt32( getValue() ); return NO_ERROR; break; } } SimpleCalculator.h #include ISimpleCalculator.h“ ….. class SimpleCalculator : public BnSimpleCalculator { private: int32_t m_iValue; public: static void instantiate(); virtual status_t onTransact( uint32_t code, const Parcel data, Parcel* reply, uint32_t flags); virtual int32_t addValue(int32_t iValue); virtual int32_t getValue() const; SimpleCalculator(); virtual ~SimpleCalculator(); }; SimpleCalcula