毕业论文-- 基于压缩感知的信号频谱测量方法 .docVIP

HUNAN UNIVERSITY 毕 业 论 文 论文题目 220kV变电站主接线设计 学生姓名 学生学号 专业班级 电气工程及其自动化四班 学院名称 电气与信息工程学院 指导老师 学院院长 200 年 月 日 基于压缩感知的信号频谱测量方法 摘要： 本文针对邵阳市新宁220kV变电站的电气主接线进行了设计。首先根据变电站实际情况综合考虑供电可靠性、灵活性以及经济性等原则，对本变电站主接线方式进行了选择。其次通过对新宁市负荷进行计算后，结合主变压器选择的原则，选择了主变压器的容量、台数、连接型式。之后对系统各种短路情况进行分析，画出系统等值电路，选取不同的短路点以及不同的短路情况进行短路电流计算，所得数据在下一步主要电气设备及导线的选择与校验中有很重要的作用。校验除了基本的动稳定、热稳定校验外个别电气设备还需要其他的校验。最后根据变电站站址周边情况以及电气平面布置原则，对配电装置以及电气平面布置方案进行了选择，并作出电气平面布置方案CAD图。 关键词：主变压器，短路电流，主要电气设备及导线，配电装置，电气平面布置 Main Wiring Design of a 220kV Substation Abstract: In this paper, the main wiring of a 220kV transformer substation has been designed. Firstly, according to the actual situation, design requirements, and a comprehensive consideration of the power supply reliability, flexibility and economy, the best type of main wiring has been chosen. After calculating the total load of Xinning city , combined with the principles of choosing main transformers, as well as the capacity, number and connection type of main transformer have been decided. Followed by analyzing the short-circuit in different conditions, drawing the equivalent circuit of the system and selecting different short circuit points, short circuit current calculation has been solved, which can facilitate the following step, that is main electrical equipment and wire selection, including circuit breakers, isolating switches, grounding switches, current transformers, voltage transformers and buses. At the same time ,we need to take a calibration with the equipment that we have chosen with the consideration of safe operation, higher reliability, flexibility as well as better economy. The calibration process concentrates on the dynamic stability and the thermal stability. Finally according to the actual circumstances surrounding the substation, as well as the principles of electrical layout, the power distribution devices and electrical layout scheme have been chosen, and a CAD picture of the electric