基于G10指令自动修改坐标偏置的数控编程加工.pdfVIP

2016年10月 机床与液压 Oct．2016 第44卷 第20期 MACHINE TOOL HYDRAULICS Vol．44 No．20 - DOI:10.3969/ j．issn．1001 3881．2016．20．017 基于 G10指令自动修改坐标偏置的数控编程加工 卢孔宝 (浙江水利水电学院机械与汽车工程学院, 浙江杭州310018) 摘要: 针对小尺寸工件采用传统加工工艺时存在加工效率过低且相关位置公差难以保证的问题, 通过实例进行工艺革 新分析、 编程方法创新、 偏置数据计算、 数控程序编制等研究, 将制定的加工工艺及编制的数控程序通过宇龙数控仿真软 件进行模拟切削, 并在真实加工环境下进行切削试验, 证明改进后的加工工艺及数控程序不仅提高了生产效率, 而且工件 的相对位置尺寸等均由机床精度保证, 减少了人为操作的误差。 该加工工艺对同类零件的加工具有一定借鉴价值。 关键词: G10指令; 坐标偏置; 加工工艺; 数控编程 - - - 中图分类号: TG659　 　 文献标志码: B　 　 文章编号: 1001 3881 (2016) 20 064 3 NCProgramming Machining Based on G10 Instruction for Automatic Modification of Coordinate Bias LU Kongbao (School of Mechanical and Automotive Engineering,Zhejiang University of Water Resources and Electric Power,Hangzhou Zhejiang 310018,China) Abstract: Inview ofthesmall sizeoftheworkpiecebytraditionalmachiningtechnology,therearetheproblemsoflow machining efficiency andrelatedpositiontoleranceisdifficulttoguarantee.Throughexamplesoftechnologicalinnovationanalysisandstudyofpro- gramming method innovation,offset data calculation,numerical control (NC) programming,and so on,cutting simulation and actual cutting test were carriedoutforfinally developedmachiningtechnology andthepreparedNCprogrambyYulongNCsimulationsoftware under real machining environment. After the reform of themachiningtechnology and NCprogram,not only theproduction efficiency is improved,but also the relative position of the workpiece size is guaranteed by the machine precision to reduce the errors caused by manual operation. The machining technology is usedfor similar parts of machining with a certain