轻型175F机体结构强度有限元分析毕业设计.docVIP

河北工程大学毕业设计 第一章：绪论 PAGE \* MERGEFORMAT I PAGE \* MERGEFORMAT I PAGE \* MERGEFORMAT PAGE \* MERGEFORMAT I PAGE \* MERGEFORMAT PAGE \* MERGEFORMAT I 轻型175F机体结构强度有限元分析 摘 要 本论文研究的对象是175F型柴油机机体，首先利用学校实验室现存的175F型发动机的样本，并对其进行详细的测绘以得到相关的数据参数。并在此基础之上，对机体结构强度进行理论分析。最后利用Pro/E软件对机体进行三维建模，并用ANSYS软件进行有限元的分析。 以运动学的动力学的理论知识为依据，对机体所处环境的运动规律以及在使用中的受力等问题进行详尽的分析，并得到了精确的分析结果。利用Pro/E对机体进行三维建模并对机体在静应力作用下的预紧工况、爆发工况进行受力分析，将结果导入ANSYS中进行分析、网格划分、施加约束和载荷，最后进行相关的强度计算。 关键词：175F机体 ANSYS 静应力 PAGE \* MERGEFORMAT I PAGE \* MERGEFORMAT I PAGE \* MERGEFORMAT PAGE \* MERGEFORMAT I PAGE \* MERGEFORMAT PAGE \* MERGEFORMAT II Finite element analysis of structural strength of light 175F body Abstract The study object of this thesis is the 175F type diesel engine, the engine type 175F existing school laboratory samples, and a detailed mapping of the parameters related to get. And on this basis, carried out theoretical analysis on the body structure strength. Finally, the 3D modeling on the body using Pro/E software, and the finite element analysis with ANSYS software . According to the theory of knowledge of kinematics dynamics as the basis,to carry out a detailed analysis of the body the movement environment as well as in the use of force, and the precise analysis results are obtained. On the 3D modeling and the body in the static pre- loading, force outbreak conditions stress analysis using Pro/E, the results into ANSYS for analysis, meshing, loading and imposing constraints, the relative strength calculation. Key Words ：175 Engine Body ANSYS Static stress PAGE \* MERGEFORMAT PAGE \* MERGEFORMAT I PAGE \* MERGEFORMAT PAGE \* MERGEFORMAT I PAGE \* MERGEFORMAT PAGE \* MERGEFORMAT III 目 录 TOC \o 1-3 \h \u HYPERLINK \l _Toc2882 摘 要 PAGEREF _Toc2882 I HYPERLINK \l _Toc15686 Abstract PAGEREF _Toc15686 II HYPERLINK \l _Toc1057 目 录 PAGEREF _Toc1057 III HYPERLINK \l _Toc23241 第一章： 绪论 PAGEREF _Toc23241 1 HYPERLINK \l _Toc20311 1.1 课题研究背