俯仰式立体车库支承和动力装置结构设计-机电工程学院本科毕业设计(论文).docVIP

俯仰式立体车库支承和动力装置结构设计 本科毕业设计(论文) GRADUATION DESIGN(THESIS) 题 目 俯仰式立体车库支承和动力装置结构设计 学生姓名 指导教师 学 院 机电工程学院 专业班级 本科生院制 2018年6月 PAGE \* MERGEFORMAT II PAGE \* MERGEFORMAT II 俯仰式立体车库支承和动力装置结构设计 摘要 机械式立体停车库是专门用来停放各类车辆立的仓储设施，它的优点在于能够发挥空间的优势，这样就能充分地利用土地资源，从而实现最大限度地停车，是专门用来解决城市交通问题的停车设施。本课题主要研究属于简单升降类立体停车库中的俯仰式机械立体停车库，并对其进行支承和动力结构装置的设计以及优化。 通过对长沙各大立体停车库的调研，以及查阅国内外相关的文献之后，结合了理论依据与现实依据，最终确定了设计方案；根据设计方案，对俯仰式立体车库的支承和动力装置进行结构设计，建立装置的三维模型；在构建了三维模型的基础上，使用SolidWorks软件进行装配体以及各个零部件的运动学、动力学仿真分析，检查装置的干涉情况以及运动轨迹，最终得到合理的运动轨迹和无干涉的装配体；分析装置的受力情况，进行主要受力零件的强度校核和结构优化；经过多次的校核与优化，得出了最终的设计结果，实现了俯仰式立体车库的轻量化，极大地降低了成本，提高了经济效益。 关键词：立体车库 SolidWorks 设计 俯仰式 PAGE \* MERGEFORMAT IV PAGE \* MERGEFORMAT IV THE SUPPORT AND POWER PLANT STRUCTURE DESIGN OF THE LUFFING 3D GARAGE ABSTRACT Parking is designed to achieve storage facilities for parking vehicles. All kinds of mechanical stereo garage can make full use of land resources, play space advantage, can achieve maximum parking, is an effective way to solve city traffic problems. In this paper the pitch type stereoscopic garage lifting simple stereo garage as the research object, design support and power structure and optimization. Through the investigation of the Changsha parking, as well as literature at home and abroad, combined with the theoretical basis and practical basis, to finalize the design; according to the design, support and power device of pitch type stereo garage structure design, 3D model building device; according to the three-dimensional model of the device the use of SolidWorks software, the kinematics and dynamics simulation analysis, interference checking device and trajectory, finally obtained the reasonable trajectory and no interference of assembly; loading conditions analysis device, check the strength and structure optimization of the main stress parts after; After checking and optimizing, the final design results are obtained. The lightweight of the pitch