平岗煤矿矿井通风设计.doc

PAGE PAGE VI PAGE 22 摘 要 本设计矿区是平岗煤矿33#、35#煤层的矿井通风设计。设计包括：矿区概述及井田地质特征、井田境界及储量、矿井工作制度和设计生产能力及服务年限、井田开拓及基本巷道布置、矿井通风系统、矿井灾害防治和提高瓦斯抽放率的主要措施。 本井田可采储量为86.01Mt，设计生产能力为1.20Mt/a，服务年限为55年，矿井采用立井开拓，全矿井布置两个工作面。矿井采用走向长臂综合机械化采煤法。 矿井通风方式为分区抽出式通风，采煤工作面为 U 型通风，上行通风。本设计完成了用风地点风量设计、巷道阻力计算，并完成了主要通风机选型。 关键词：开拓设计；通风设计；瓦斯抽放率。 Abstract This design is Pinggang coal mining area 33, # 35 coal mine ventilation design. Design: f 86.01 Mt, design production capacity of 1.20 Mt / a, for 55 years of service, a mine and mine outlined geological features, and the realm of mine reserves, mine production capacity of the system and design and length of service, mine development and basic roadway layout, the mine ventilation system, mine disaster prevention and increase the main rate of gas drainage measures. The mine recoverable reserves o mine shaft development, the entire layout of two mine face. Mine use tilt the long arm of mechanization all Comprehensive cross-loading mining. Mine ventilation for the district out of ventilation, coal face for the U-shaped ventilation, up ventilation. This completed the design of wind sites with air volume design, roadway resistance, and completed a major fan selection. Key words: pioneering design; ventilation design; gas drainage rate. 目 录 TOC \o 1-3 \h \z \u HYPERLINK \l _Toc201236066 摘 要 PAGEREF _Toc201236066 \h I HYPERLINK \l _Toc201236067 Abstract PAGEREF _Toc201236067 \h II HYPERLINK \l _Toc201236068 1 矿区概述及井田地质特征 PAGEREF _Toc201236068 \h 1 HYPERLINK \l _Toc201236069 1.1矿区概述 PAGEREF _Toc201236069 \h 1 HYPERLINK \l _Toc201236070 1.1.1地理位置 PAGEREF _Toc201236070 \h 1 HYPERLINK \l _Toc201236071 1.1.2地形、地势及水文 PAGEREF _Toc201236071 \h 1 HYPERLINK \l _Toc201236072 1.1.3矿井气候条件 PAGEREF _Toc201236072 \h 2 HYPERLINK \l _Toc201236073 1.1.4矿区水、电、通讯、建筑材料供应 PAGEREF _Toc201236073 \h 2 HYPERLINK \l _Toc201236074 1.1.5矿区内煤矿分布及工农业生产等工业分布 PAGEREF _Toc201236074 \h 3 HYPERLINK \l _Toc201236075 1.2井田地质特征 PAGEREF _Toc201236075 \h 3 HYPERLINK \