基于多相材料的稳态热传导结构轻量化设计1).PDFVIP

49 2 Vol. 49 No. 2 2017 3 Chinese Journal of Theoretical and Applied Mechanics Mar.2017 1) 2) (102206) (116024) . . . . . . . . . . , , , , O343 A doi 101879-16-262 STRUCTURAL LIGHT DESIGN FOR STEADY HEAT CONDUCTION USING MULTI-MATERIAL1) Long Kai2) Wang Xuan Han Dan (State Key Laboratory for Alternate Electrical Power System with Renewable Energy Sources North China Electric Power University Beijing 102206China) (State Key Laboratory of Structural Analysis for Industrial Equipment Dalian University of Technology Dalian 116024Liaoning China) Abstract In topology optimization problems of structures containing multiphase materials, it is common practice to set the volume constraint of each constituent phase or total mass of entire constituent phase constraint to control the final material usage. On the practical engineering background for lightweight design, it is of significance that the minimized weight is taken as the objective in optimal model from the engineering point of view. To solve the topology optimization problem of steady heat conductive with the multiple candidate materials, a new modeling method of weight minimization with the given thermal compliance constraint under multiple load cases is proposed. Following the modeling manner of independent continuous mapping method, two sets of independent topological variables are employed to identify ele- mental thermal conductive matrix and elemental weight, respectively. The sensitivities of thermal compliance and global 2016–09–18 2016–12–02 , 2016–12–02 . 1) (1