《网络互联技术》课程概述课件.ppt

精品 Slide 1 of 2 Purpose: This slide states the course objectives. Emphasize: Read or state each objective so each student has a clear understanding of the chapter objectives. Slide 2 of 2 Purpose: This slide continues the course objectives. Transition: Following is a figure of the network the students will learn to build during this course . Purpose: This figure describes what the students will learn to build in this course. Emphasize: This figure is similar but not identical to the laboratory exercise network. Note: The network in the laboratory exercises first start with a LAN environment and shift to a remote access WAN environment later in the course. Purpose: This figure states the chapter prerequisites. Emphasize: Make sure the students have a clear understanding of the course prerequisites. To attend this course the student should have basic knowledge of data networking comparable to the material found in Internetworking Technology Multimedia (ITM). Generally the student should have a basic understanding of networking concepts and an exposure to IP or IPX networking. Note: Poll the students on their understanding of the prerequisites and gage your classroom discussions around the students’ level of knowledge. This course part of the certification requirements for Cisco Certified Network Associate (CCNA). Transition: The following figure describes what is expected of the students during this course. Purpose: This figure describes the recommended presentation of the course materials. Emphasize: The table in the figure shows the individual chapters of the ICND course. These chapters comprise the five modules of the course. Refer to the student notes for a description of the modules. Transition: Graphics icons of the devices that are featured in this course follow on the next page. Purpose: This figure identifies the symbols typically used throughout the graphical presentations of this course. 第一讲《网络互联技术》课程概述 主讲：史宝慧 课程目标 通过本课程的学习，可以完成如下任务： 了解集线器、交换机、路