毕业论文：车辆_毕业设计外文翻译--汽车发动机.docVIP

译文题目： Automobile engine 汽车发动机 学生姓名： 学　　号： 专　　业： 机械设计制造及其自动化（车辆工程） 所在学院： 机电工程学院 指导教师： 职　　称： 讲师 2013年 2 月 24 日 AUTOMOTIVE ENGINE 1 Engine Classification and Overall Mechanics The automobile engines can be classified according to: (1) cycles, (2) cooling system, (3) fuel system, (4) ignition method, (5) valve arrangement, (6) cylinder arrangement, (7) engine speed. Engines used in automobiles are the internal combustion heat engines. The burning of gasoline inside the engine produces high pressure in the engine combustion chamber. This high pressure force piston to move, the movement is carried by connecting rods to the engine crankshaft. The crankshaft is thus made to rotate: the rotary motion is carried through the power train to the car wheels so that they rotate and the car moves. The engine requires four basic systems to run (Fig. 2-1). Diesel engines require three of these systems. They are fuel system, ignition system (except diesel), lubricating system and cooling system. However, three other related systems are also necessary. These are the exhaust system, the emission-control system, and the starting system. Each performs a basic job in making the engine run. Fig. 2-1 The engine construction 2?Engine?Operating Principles Fig. 2-2 Engine terms The term “stroke” is used to describe the movement of the piston within the cylinder. The movement of the piston from its uppermost position (TDC, top dead center) to its lowest position (BDC, bottom dead center) is called a stroke. The operating cycle may require either two or four strokes to complete. Most automobile engines operate on the four stroke cycle (Fig. 2-2). In four-stroke engine, four strokes of the piston in the cylinder are required to complete one full operating cycle. Each strok