火试金重量法测定铅阳极泥中银含量的改进-有色金属科学与工程.DOC

火试金重量法测定铅阳极泥中银含量的改进-有色金属科学与工程.DOC

  1. 1、原创力文档(book118)网站文档一经付费(服务费),不意味着购买了该文档的版权,仅供个人/单位学习、研究之用,不得用于商业用途,未经授权,严禁复制、发行、汇编、翻译或者网络传播等,侵权必究。。
  2. 2、本站所有内容均由合作方或网友上传,本站不对文档的完整性、权威性及其观点立场正确性做任何保证或承诺!文档内容仅供研究参考,付费前请自行鉴别。如您付费,意味着您自己接受本站规则且自行承担风险,本站不退款、不进行额外附加服务;查看《如何避免下载的几个坑》。如果您已付费下载过本站文档,您可以点击 这里二次下载
  3. 3、如文档侵犯商业秘密、侵犯著作权、侵犯人身权等,请点击“版权申诉”(推荐),也可以打举报电话:400-050-0827(电话支持时间:9:00-18:30)。
查看更多
收稿日期:2018 收稿日期:2018-1-3 基金项目:青海省企业研究转化与产业化专项资助(2016-GX-C9) 通信作者:王景凤(1980- ),女,本科,工程师,主要从事有色金属行业分析方法的研究,E-mail:jingfeng3735@163.com. 王景凤1,2,3 (1.西部矿业集团科技发展有限公司,青海 西宁 810006; 2.青海西部矿业工程技术研究有限公司,青海 西宁 810006; 3.青海省高原矿物加工工程与综合利用重点实验室,青海 西宁 810006) 摘 要:通常粗铅中金、银含量的分析采用标准方法YS/T 248.6-2007,而该方法分析时要进行配料、熔融、二次试金、灰吹等关键试验环节,操作过程繁琐,一个样品的分析时间大约需要14 h,不但要进行高温作业,而且分析成本高,环境污染相对较大。响应国家节能、减排、降耗的号召,根据粗铅中铅含量在96 %以上的特性,对分析方法进行了改进试验研究,将粗铅试样直接在900 ℃下进行灰吹,突破了传统行业标准方法,体现了环保新理念,达到了节能、减排、降耗、省时的效果。经过验证,改进后的方法分析结果重现性好、准确度高,能够准确、快速指导生产。该方法适用于粗铅中金量:1~50 g/t,与银量:50~5000 g/t的测定。在样品中出现银量与金量的比例小于4时,在灰吹过程应补加纯银。 关键词:火试金;粗铅;金;银;改进 中图分类号:TF812 文献标志码:A Research on the improvement of determination Au and Ag in crude lead by fire assay method WANG Jingfeng1,2,3 (1.Technology Development of Western Mining Group Co.Ltd., Xining 810006 ,China; 2.The Engineering and Technology research of Qing hai Western Mining Co.Ltd., Xining 810006 ,China; 3.Qing hai Key Laboratory Plateau Comprehensive Utilization and Mineral Processing Engineering,Xining 810006 ,China;) Abstract: Usually,the analysis of Silver and Gold in Crude Lead by the standard method YS/T 248.6-2007,The method include ingredients, melting, assaying two key links, ash blowing test,the operation is tedious, analysis of a sample takes about 14 hours, Not only high temperature work, but also high cost of analysis, relatively large environmental pollution. Respond to the call of national energy saving, emission reduction and consumption reduction, according to the characteristics of lead content in crude lead more than 96, an improved experimental study has been carried out.The crude lead sample was directly blown at 900℃. It breaks through the traditional industry standard method and embodies the new idea of environmental protection, The utility model achieves the effects of saving energy, reducing emission, reducing consumption and saving time. The verification results show that the improved method has good repeatability and high accuracy. T

文档评论(0)

xiaozu + 关注
实名认证
内容提供者

该用户很懒,什么也没介绍

1亿VIP精品文档

相关文档