平面油压裁断机设计说明书.docVIP

平面油压裁断机 PAGE 24 PAGE 23 需要全套加 qq:296716028 目 录 TOC \o 1-3 \h \z \u 1 前言 1 1.1 课题简介 1 1.2 发展状况 2 2 总体论证方案 4 3 选择电动机 6 3.1 传动参数计算 6 3.2 确定电动机功率及其它参数 6 4 液压系统的设计 7 4.1 液压系统原理图 7 4.2 油缸的设计 7 4.2.1 缸体的设计 7 4.2.2 活塞和活塞杆的选择 8 4.2.3 活塞杆防尘圈的选择 9 4.3 选择液压泵 9 4.4 油箱的设计 10 4.4.1 油箱的容积 10 4.4.2 油箱的内部结构 10 4.5 其他附件的说明 11 4.5.1 滤油器 11 4.5.3 油口的设计 13 5 机器强度的校核 14 5.1 轴的强度计算 14 5.1.1 扭转强度 14 5.1.2 弯扭合成强度条件 15 5.2 螺栓组的校核计算 16 5.2.1 螺栓组受力分析 17 5.2.2 确定单个螺栓的工作载荷 18 5.2.3 螺栓强度计算 19 5.2.4 校合接合面上的挤压力 19 6 机器的其他部分的说明 20 7 结论 21 参考文献 22 致 谢 23 附 录 24 平面油压裁断机 摘要：为了实现对皮革、橡胶、塑料、纸板、布料等物料的裁断，设计了平面油压裁断机。在对盐城市智成机械有限公司现场调查的基础上，依据满足机器使用性要求、经济性要求、社会性要求、专有要求以及外形美观等设计要求拟定总体方案。改变了以往传统的设计思路，技术上有较大改进，改变传统手工下料，主要采用电动机带动油泵以及液压系统传动，同时采用连杆装置拉动压刀在导轨上滑动，进而实现裁断。对零部件的材料选择、失效形式、设计准则、结构要求等进行设计计算，较好的实现了设计要求。 关键词：液压；连杆；整体设计 The design of plane hydraulic pressure judgment machine Abstract：In order to realize to material the and so on leather, rubber, plastic, cardboard, cotton material judgment, has designed the plane hydraulic pressure judgment machine. In becomes the machinery limited company scene investigation to the Yan cheng city wisdom in the foundation, the basis satisfies the machine use request, the efficient request, the social request, the appropriation request as well as the contour is artistic and so on the design request draws up the overall plan. Changed the former traditional design mentality, in the technology had a bigger improvement, the change tradition manual yummy treats, mainly used the electric motor impetus oil pump as well as the hydraulic system transmission, simultaneously used the connecting rod installment to draw presses the knife to skid on the guide rail, then realization judgment. To the spare part choice of material, the expiration form, the design criterion, the structure request and so on carry on the design calculation, better realization design request. Keywords: Hydraulic pr