单片机RS485通信源程序.docVIP

附录一、主机源程序 #include reg52.H unsigned char xdata table[5]; unsigned char code tab[]={0x03,0x9f,0x25,0x0d, 0x99,0x49,0x41,0x1f, 0x01,0x09,0x05,0xc1, 0x63,0x85,0x61,0x71,0xff}; sbit ctrl=P1^2; sbit DATA=P1^0; sbit CLK=P1^1; void show(unsigned char m)//LED显示子程序 { unsigned char i,d; d=tab[m]; for(i=0;i8;i++) { DATA=d0x01; CLK=0; CLK=1; d=d1; } } void interrupt0(void) interrupt 0 using 0//串行中断程序 { unsigned char cm0,cm1,sum0,sum1,i; lab: sum0=0; ctrl=1;//将MAX485设置为发送方式 SBUF=0xFF;//发送数据申请 while(TI!=1); ctrl=0; //将MAX485设