含裂纹管道的失效评定曲线的实例验证.PDF

DOI :10.16579/j.issn.1001.9669.2003.03.004 Journal of Mechanical Stren th 2003, 25(3):251～ 253 VALIDATION OF FAILURE ASSESSMENT CURVE OF LINEPIPE CONTAINING CRACKS 　 　　 (石油大学(北京)机电学院, 北京 102249) SHUAI Jian　XU Kui (School of Electrical and Mechanical Engineering, University of Petroleum, Beji ing 102249, China) 　, 。 J , J 。 , , , , 。 　J 　　　　　 　TQ055.8　O346.1 Abstract　The failure assessment curves of linepipe containing cracks are verified y a case that came from the three pipes urst in a proof test of an oil pipeline.The asic equation of failure assessment curve for a semi-elliptical flaw in a pipe surface is descri ed.J integral and its elastic component o tained y line spring element method.For the three pipes the failure assessment curves are set up according to the size of a flaw and the data of material mechanical test.Comparisonwith the result in the proof test shows the failure as- sessment curves presented in this paper is accurate. Key words　J inte ral;Finite element method;Crack;Failure assessment curve;Safety assessment;Pipelines Corresponding author:SHUAI Jian, E-mail:shuaij @ , Fax:+86-10 The project supported y the Innovation Fund of the National Petroleum Corporation of China (No.CX98-27). Manuscript received in revised form Ram erg-Osgood —, 1　 n ε ε=σ σ+α(σ σ) (1)