无线宽频网络设计规划研究报告.docVIP

WIFI RF SYSTEM DESIGN 无线宽频网络设计规划研究报告 7/2/2005 Introduction Coverage, interference, and blocking considerations are the center of the RF system design work. For any point in the service area of the RF system, we must first have enough RSL in both uplink and downlink directions. The required signal is mainly to combat the noise in the environment. In an analog voice system, this RSL provides the system with enough S/N so that the voice quality is acceptable. In a digital system, the S/N renders a low enough BER so that the amount of retransmission is within limit and the system can operate norma